Conservation to overcome oblivion. New methods for the survival of lost heritage memory
Resumo
Unfortunately, it sometimes happens that heritage buildings and structures unearthed during the construction of new infrastructures cannot be adequately conserved once dug out. Before the eternal doubt, keeping or covering them, the economic aspect often takes precedence. Luckily, when the decision is to hide it again, technology offers the possibility of acquiring, modelling and storing the 3D data of the remains and allows their later visualization with a very realistic appearance. Therefore, the memory of these remains destined to be forgotten survives beyond the archives of the professionals who documented them. In this paper, the opportunities opened by Augmented and Virtual Reality applications for the preservation and dissemination of re-covered, or even lost, remains will be explained through the finding came about in the works performed for renovating an old road in Fuente del Maestre (Spain)
Downloads
Referências
AICARDI, I., CHIABRANDO, F., LINGUA, A.M., NOARDO, F. (2018). Recent trends in cultural heritage 3D survey: The photogrammetric computer vision approach, Journal of Cultural Heritage, 32(1): 257–266. https://doi.org/10.1016/j.culher.2017.11.006
ANDREU, J., SERRANO, P. (2019). “Contributions of the digital photogrammetry and 3D modelling of Roman inscriptions to the reading of damaged tituli: An example from the Hispania Tarraconensis (Castiliscar, Saragossa)”, Digital Applications in Archaeology and Cultural Heritage, 12. https://doi.org/10.1016/j.daach.2019.e00091
ARGYRIOU, L., ECONOMOU, D., BOUKI, V. (2020). “Design methodology for 360 degrees immersive video applications: the case study of a cultural heritage virtual tour”, Personal and Ubiquitous Computing. https://doi.org/10.1007/s00779-020-01373-8
AZUMA, R.T. (1997). “A Survey of Augmented Reality”, Presence: Teleoperators and Virtual Environments, 6 (4): 355–385.
BEKELE, M. K., PIERDICCA, R., FRONTONI, E., MALINVERNI, E. S., GAIN, J. (2018). “A Survey of Augmented, Virtual, and Mixed Reality for Cultural Heritage”, Journal on Computing and Cultural Heritage, 11 (2): 1–36. https://doi.org/10.1145/3145534
CASTRIOTA, B. (2019). “Authenticity, Identity, and Essentialism: Reframing Conservation Practice”. In: What is the essence of conservation? Materials for a discussion. F. Mairesse & R. F. Peters (Eds.). ICOFOM: París: 39-48.
COZZANI, G., POZZI, F., DAGNINO, F.M., KATOS, A.V., KATSOULI, E.F. (2017). “Innovative technologies for intangible cultural heritage education and preservation: the case of i-Treasures”, Personal and Ubiquitous Computing 21(2): 253-265. https://doi.org/10.1007/s00779-016-0991-z
DESVALLÉES, A., MAIRESSE, F. (Eds.) (2010). Key concepts of museology. Armand Colin: París.
HÖLLING, H. (2017). “The technique of conservation: on realms of theory and cultures of practice, Journal of the Institute of Conservation, 40 (2): 87-96.
ICOMOS (1994). The Nara document on authenticity.
ICOMOS (2004). International Charters for Conservation and Restoration. Monuments and sites I. ICOMOS: München.
MAH, O. B. P., YAN, Y., TAN, J. S. Y., TAN, Y-X., TAY, G. Q. Y., CHIAM, D. J., WANG, Y-C., DEAN, K., FENG, C.-C. (2019). “Generating a virtual tour for the preservation of the (in)tangible cultural heritage of Tampines Chinese Temple in Singapore”, Journal of Cultural Heritage, 39: 202-211. https://doi.org/10.1016/j.culher.2019.04.004
MERCHÁN, M.J.; MERCHÁN, P.; SALAMANCA, S.; PÉREZ, E.; NOGALES, T. (2019). “Digital fabrication of cultural heritage artwork replicas. In the search for resilience and socio-cultural commitment”, Digital Applications in Archaeology and Cultural Heritage, 15: e00125. https://doi.org/10.1016/j.daach.2019.e00125
NIQUET, N.D., MAS-BARBERÀ, X. (2018). “El registro 3D como medio para el análisis y difusión del patrimonio escultórico. El caso de la escultura en cera del Écorché”, Ge-conservación, 13: 5-16. https://doi.org/10.37558/gec.v13i0.551
NJEREKAI, C. (2019). “An application of the virtual reality 360 degrees concept to the Great Zimbabwe monument”, Journal of Heritage Tourism. https://doi.org/10.1080/1743873X.2019.1696808
PASCUAL, J. (1999). “Fuente del Maestre: Dos mil años de historia”. En: Fuente del Maestre. 100 años de ciudad, 2000 años de historia. Pascual, J. (coord.). Excmo. Ayto. Fuente del Maestre: 13-53.
PÉREZ, E., SALAMANCA, S., MERCHÁN, P., ADÁN, A., CERRADA, C., CAMBERO, I. (2008). “A Robust Method for Filling Holes in 3D Meshes Based on Image Restoration”. In: Advanced Concepts for Intelligent Vision Systems, 10th International Conference, ACIVS 2008, Bourennane, S. et al. (Eds.). Springer: 742-751. https://doi.org/10.1007/978-3-540-88458-3_67
PÉREZ, E., MERCHÁN, M.J., MORENO-RABEL, M.D., MERCHÁN, P., SALAMANCA, S. (2018). “Touring the Forum Adiectum of Augusta Emerita in a virtual reality experience”. In: Digital Heritage. Progress in Cultural Heritage: Documentation, Preservation, and Protection, Ioannides, M. et al. (Eds.). Springer: 548-559.
PEREZ, E, MERCHÁN, M.J., SALAMANCA, S. AND MERCHÁN, P. (2019). “Virtual reality to allow wheelchair users touring complex archaeological sites in a realistic manner. Towards their actual social integration”, International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XLII-2/W9: 597-604. https://doi.org/10.5194/isprs-archives-XLII-2-W9-597-2019
RUIZ BAZÁN, I., VITA, G.E.E. (2017). “The utility of the application of new three-dimensional technologies for the study and dissemination of heritage from a historical technical perspective: case studies”, Ge-conservación, 11: 208-203. https://doi.org/10.37558/gec.v11i0.480
RUIZ TORRES, D. (2017). El uso de tecnologías digitales en la conservación, análisis y difusión del patrimonio cultural. Acción Cultural Española (AC/E).
SÁNCHEZ-APARICIO, L. J., MORENO-BLANCO, R., MARTÍN-JIMÉNEZ, J. A., RODRÍGUEZ-GONZÁLVEZ, P., MUÑOZ-NIETO, A. L., AND GONZÁLEZ-AGUILERA, D. (2019). “Smartwall: A new web-based platform for the valorization of the medieval wall of Ávila”, Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-2/W15: 1055–1062. https://doi.org/10.5194/isprs-archives-XLII-2-W15-1055-2019
SÁNCHEZ GONZÁLEZ, L.M. (2019). “A high-roman-empire alpharera industry between Villafranca de los Barros and la Fuente del Maestre”, El Hinojal, Revista de Estudios del Muvi, 12: 8-21.
TAIT, E., LAING, R., GRINNALL, A., BURNETT, S., ISAACS, J. (2016). “(Re)presenting heritage: laser scanning and 3D visualisations for cultural resilience and community engagement”, Journal of Information Science, 42(3): 420–433. https://doi.org/10.1177/0165551516636306
TUCCI, G, BONORA, V, CONTI, A, FIORINI, L. (2017). “High-quality 3D models and their use in a cultural heritage conservation project”, The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Volume XLII-2/W5: 687-693. https://doi.org/10.5194/isprs-archives-XLII-2-W5-687-2017
ZHOU, M., GENG, G., WU, Z. (2012). Digital Preservation Technology for Cultural Heritage. Springer.
Os autores conservam os direitos de autor e de propriedade intelectual e garantem à revista Ge-Conservación o direito de edição e publicação do trabalho, sob a Creative Commons Attribution License. Este permite a partilha do trabalho, por outros, com o reconhecimento da autoria do trabalho e da publicação inicial nesta revista.
Os artigos podem ser utilizados para fins científicos e formativos, mas nunca com fins comerciais, expressamente, sancionados por Lei.
A informação existente nos artigos é da exclusiva responsabilidade dos autores.
A revista Ge-Conservación e os autores podem estabelecer, em separado, acordos adicionais para a distribuição não exclusiva da versão da obra publicada na revista (por exemplo, colocá-la num repositório institucional ou publicá-la em livro), com o reconhecimento da sua publicação inicial nesta revista.
É permitido e incentivado aos autores difundirem os seus trabalhos, electronicamente (por exemplo, em repositórios institucionais ou no seu próprio site) depois da sua publicação na revista Ge-Conservación, já que pode dar lugar a intercâmbios produtivos, assim como a citações mais amplas e mais cedo dos trabalhos publicados pelo autor.
Os dados pessoais fornecidos pelos autores são utilizados, unicamente, para os fins da revista e não serão proporcionados a terceiros.
